Painted Galvanized Sheet
Painted galvanized steel sheets are hot dip galvanized by continuous process in accordance with EN 10143:2006 standards, with 100-275 gr/m² zinc-coated. Galvanized coating improves corrosion resistance of the sheet. Due to its hardness, galvanized sheet is resistant to impacts and abrasion. On load bearing layers, galvanized sheet thickness should be minimum 0,50mm.
| Quality | Thickness Tolerance |
Tensile Strength |
Elongation at Break % | Coating Weight (Zinc) Hot Dipping |
Paint Types |
|---|---|---|---|---|---|
| DX51D+Z | ±0,05MM | 270-500 | Min 22* | 100-275 gr/m² | Polyester, PVdf, Plastisol, Silicone Polyester, Polyurethane |
| EN 10143:2006 | EN 10143:2006 | EN 10143:2006 | EN 10143:2006 | EN 10143:2006 | |
| *For thickness equal to or less than 0,70mm, min.elongation values will be reduced by 2 points. | |||||
| EN 10143:2006 |
DX51D Thickness Tolerance | ||
|---|---|---|---|
| Nominal Thickness (mm) |
Roll Width | ||
| ≤1200mm | 1200<t≤1500mm | >1500mm | |
| 0.20<t≤0.40 | ±0.05 | ±0.06 | ±0.07 |
| 0.40<t≤0.60 | ±0.05 | ±0.06 | ±0.07 |
| 0.60<t≤0.80 | ±0.06 | ±0.07 | ±0.08 |
| 0.80<t≤1.00 | ±0.07 | ±0.08 | ±0.09 |
| 1.00<t≤1.20 | ±0.08 | ±0.09 | ±0.11 |